The Titan iRepeater
Keeping you connected
SKU
iR6-T
iR4-T
Bands
B28/ B20/ B8/ B3/ B1/ B7
B28/ B20/ B8/ B3
Port Sense
Yes
Yes
Monitoring
Yes
Yes
Cell Scanning
Yes
Yes
The Titan repeater system
The Titan is a commercial grade, cellular repeater which amplifies mobile coverage in large buildings for all operators, enabling clear voice calls in the office, as well as supporting the fastest internet speeds: 5G/4G/3G/2G.
PortSense
PortSense technology automatically detects when an antenna is connected to either the indoor or outdoor antenna port.
The new Smart Antennas feature an integrated white status LED, while corresponding white LEDs are also built directly into the repeater ports. When the antennas and cabling are connected correctly, both LEDs illuminate, providing installers with immediate visual confirmation that the hardware installation is functioning properly.
PortSense status is also continuously monitored through the StellaControl platform. If any hardware fault, disconnection, or system degradation is detected, automatic alerts can be generated to ensure rapid response and ongoing system reliability.
Carrier Aggregation
Amplifying all 6 cellular bands is essential for Carrier Aggregation (CA). It enables mobile devices to connect to multiple frequency bands simultaneously, increasing the total available bandwidth at any given time. In practice, this delivers faster data speeds, improved network performance, and a more robust and reliable connection.
Full bandwidth
Competing repeaters only amplify a subset of the total bandwidth, typically only 8 sub-bands. Stella amplifies ALL sub-bands resulting in more bandwidth, more robust connection, higher data speeds.
Network scanning
The internal modem and embedded SIM allow for a periodic automatic Cell Scan. This allows for in depth monitoring of the exterior RF environment. The cell towers in the vicinity of the building can be checked to ensure good quality incoming signal.
Our 4 step process
Every professional repeater installation consists of 4 steps. Our certified installers are all trained in this process to ensure that all installations adhere to our exacting standards.
Step 1
Initial Review
Send us the plans of your building. We will create professional heat map designs showing antenna signal strengths per floor. BOMs and costs estimates will also be calculated.
Step 2
On-Site Survey
Visit the building to conduct site surveys using the Shark analyser. A Stella engineer will guide you through the on-site survey process.
Step 3
Design Proposal
The design is refined and accurate BOM is generated.
Step 4
Installation
Stella engineers will guide you through the installation of the equipment to ensure best results.
Want to Learn More?
StellaPlanner
Our online repeater design tool. Optimize antenna locations. View heat maps. Visualize the RF environment before and after system integration.
Mobile WebApp
Snap the QR code on the repeater with your phone to access the device dashboard.
Modular System
Just add LineAmplifiers to increase coverage for any sized building. This increases the distance into a building by up to 130m. The system is plug and play, providing cellular coverage in any sized building.
Case Studies
View our wide range of case studies, from underground car parks, to airports, hotels, hospitals plus more.
